Archive for the ‘Tips and tricks’ Tag

New Hover Height Setting

Here’s a tip for you:  if you’re using the newer clients, such as the latest version of Firestorm, don’t be surprised if some people tell you that you’re walking through the ground occasionally.  The thing is that, if you’re correcting your hover with the new “on-the-fly” hover height setting in right-click context menu, it will be visible only in the new viewers, similar to mesh only being visible in viewers built to accept mesh.  If this bothers you, you can still modify the actual hover number on the shape itself (assuming you have a modifiable shape).  However, as the new-viewer titer grows, this will change.

signature 3

Tutorial — How to Make a Wallpaper

Looking for something fresh on your computer desktop?  Have you thought of all those hundreds of Second Life photos you’ve been accumulating since you first learned how to use the snapshot camera?  If you have a graphics editor, and your photos are large enough to work with, there should be no great problem, and the process is very easy to do.  Here’s a tutorial for relative newcomers to photo editing, and can be used for RL photos as well as Second Life.

Wallpaper tutorial 1

1.  I’ve used GIMP in the past because it’s free, but I much prefer Paint Shop Pro; this was the program I started out with long ago, so I’m most comfortable with its controls and function names.  Any photo editor that can do resize/resample and crop is fine; the key is that you have a large enough photo to work with in the first place.  It must be equal to, or exceed, the screen size of your monitor in both dimensions for you to create a non-fuzzy wallpaper.  I routinely shoot my work at 4000 pixels width, so this is almost never a problem.  So the first thing to do, of course, is to choose which one you want to edit, and load up your photo into your editor.  Then copy the entire image, paste it into the editor as a new image, and close the original.  You’ll make all your changes on the copy, and have the original to fall back on if you make a goof.

Wallpaper tutorial 2

2.  My screen is 1920 x 1080 pixels, or approximately 16:9 ratio.  I choose Resize in Paint Shop Pro (your editor may call it Resample; they’re the same effect, though resampling usually gives better quality).  Your first focus is on the smaller of the two dimensions.  I almost always shoot a custom screen size with the Snapshot tool in whichever SL client I’m using, which works out (by keeping the dimensions constrained in the Snapshot function in the client) to 4000 pixels wide by 2119 pixels high.  The height is the smaller — it usually will be — and this is what I will alter with the Resize.  In the Pixel Dimensions section of the toolbox, I change 2119 to 1080, my actual screen height, and click OK.

Wallpaper tutorial 3

3.  Now that I have the height established, I need to crop the photo down to the correct width.  If I don’t, and leave it as it is, the image will spill off the right side of the screen.  If I try to avoid that by using settings like Fit in Windows 8 in the wallpaper area, the picture will scrunch and look…strange.  If it’s too short, the Stretch function will also make the end product look peculiar.  So I must do a final crop to get the correct width of 1920 across.  After deciding what I can lop off, I click on the Crop tool (it will usually look like the tool icon in the left sidebar on this photo), and stretch the grid that produces to cover the entire photo up and down.  (Remember, we want that full height as well!)  In photographing in world, I usually try to emphasize one side or another for this purpose during the shoot, as well as to follow the Rule of Thirds that many photographers, SL and RL, say improves composition of a photo tremendously.  As an example of the Rule, see the next photo, from my last Hair Fair article:

Wallpaper tutorial 5

Here, I’ve already resized the photo of me, which I shot with myself at an offset from the center of the photo as well — to specifically help the editing side along for this purpose.  I’ve selected the grid subfunction of the Crop tool, because it breaks the crop panel up for me into thirds, with guide lines to aid me in the positioning of the composition so that I’m on one or the other of the “third” splits of the photo.  (For wallpaper of modeling photos, I normally place myself on the right, since all of my desktop icons snap to the left of the screen.)  I adjust the size to the width of 1920, then move it with the mouse so that my body is splitting the grid line as evenly as possible; this puts me square on the mark, and draws first attention of the viewer — the “eye” of the viewer — to me.  I approve the position, after checking the dimensions in the upper toolbars, by clicking the check mark on the small toolbar you see on the photo, or by double clicking inside the grid, and the areas outside the grid are cut off, leaving me with the finished size.

The same would be done with the landscape photo above.  A good crop site, if you have enough width to choose from, would perhaps place the upper left crosshair over the mansion door, or as close to it as possible, emphasizing the entrance and its stairway and drawing the viewer’s eye more rapidly to that location.  For followers of the Rule, the crosshair intersections are “power points,” and greatly desired.

Keep in mind that you don’t need to use the Rule of Thirds; you can have everything centered if you wish, or not worry about anything but size.  There is some debate over whether the Rule is truly valid, and it can be as much a personal call as anything — what looks good to you?  I, myself, use the Rule in wide shots, especially when I’m modeling and want to show the entire outfit I’m wearing.  But I’ll ignore the Rule when I feel it’s justified; and, if I’m cropping in for a closeup, then I’m obviously going to be central to the photo.  It all depends on the moment and the need, and experience will tell you what works best for your situation.

In any case, you’ve cropped your shot to the proper size now.  You did check your dimensions before accepting the crop, right?  You didn’t???  Hopefully you worked on a copy, and haven’t saved over the original!  Backup with control-Z if you can, or shut the bad copy and make a new copy, and start again.

Wallpaper tutorial 4

4.  All that’s left is to sign your work, if you choose, and save it.  Then you can share it with other Residents via the usual platforms, such as Facebook, SLSN, Plurk, Twitter, or, especially, Flickr.

There are plenty of wallpaper groups on Flickr, but only one I’ve found specifically for Second Life, and it’s rather inactive.  Time to join and fatten that collection up, eh?  I submit my own wallpaper to it, but I also add them to the group 16:9 Widescreen Creativity, and nobody has given me the Dickens about adding virtual-world photographs and fashion shots yet.  If you do add to such a group, make sure it’s appropriate to the subject, or general, and that it’s meant for the size of wallpaper you’ll be submitting.  Throwing 1920 wallpaper on a 1024×768 group doesn’t work, and contributes to screen envy and flamage.  It’s also polite (and helps drive hits) to add a tag to your photo with the size.  Remember to put it inside double quotes, so that Flickr doesn’t split it up!  And, of course, if you do share your wallpaper this way, make sure that it’s set for sharing, so that people can download it!  Locking a wallpaper with an “All Rights Reserved” copyright (a) defeats the purpose, and (b) can be circumvented with a little knowledge of how to use the browser, or with other tools.  (That’s how I’ve added some winners’ photos to the Oscar Fashion Photo Contest winner articles over the years.)  Far better to be generous, and put it up under Creative Commons.

Hopefully you’ll share some of your work with other Residents, and with the world!

signature 3


Inventoil Made Easier

Harper Beresford uses this interesting trick in Firestorm client to do some bulk inventory control. You can check to see if it works in other viewers, but the odds are it works only in Firestorm. I haven’t tried this myself, as I’m satisfied with Bright or other similar boxes; your mileage may vary.

A Passion for Virtual Fashion

Inventoil Made easy

“There’s never enough of the stuff you can’t get enough of.” ~ Patrick H.T. Doyle

Inventoil Made easy

A few years ago I introduced the word “inventoil” to the world, which was my word for going through my inventory and sorting things. At the time my inventory was almost manageable. I knew what I had and where it might be. That ended a couple years ago when boxes exploded with fatpacks of fatpacks, and I started joining events to blog. And oh, well, I shop a lot too. Pfff.

StarlightShining clued me into a fancy trick in Firestorm that is going to revolutionize your inventory, especially if you have a hoarding problem as I do. And I’m going to teach you how to do it. The bottom line is that you are going to be able to pack massive amounts of stuff into a package without manually moving it. It’s kind…

View original post 1,054 more words

Firefox Themes/Personas and Second Life Web Pages

A quickie note for something I’ve discovered.  If you use Firefox, and Web pages (like Marketplace or Maps) from Second Life stop showing up on your screen, try changing your current theme or Persona.  That was happening to me, and a shift in theme cleared the situation up.  I’d gone to a different theme recently, and everything disappeared.  After reasoning the problem through on what changes I’d made, a shift to a different theme cured the problem.

You may now resume your regular surfing.


Posted July 9, 2013 by Harper Ganesvoort in Announcements, Tips and tricks

Tagged with ,

Glueing My Hair Back On

This is what I looked like today, when I was desperately trying to add a texture to Second Life so I could do a shot of something in my Secret (Public) Photo Studio.  Every time — every time — I hit Control-U, or chose from the menu, it didn’t matter which, I’d get a Windows Thinking dooley-bob wheel, then a notice that a crash was being reported to Second Life.  Checking with people on Plurk and one of the helpful groups in world gave me no clue; it was suggested that I clear my cache, which I did, but I’d already cleared it yesterday.  It didn’t matter which client I was on, either; Firestorm choked and died as bad as Linden (which I actually prefer right now for the most part).

I finally tried searching for an answer — and the Tablet fell on me from the sky with a great granitic ga-thump.  A slight digression that will make sense very shortly:  I’m my church’s Webmaster in real life.  I’m also something of the go-to girl for passing church photos to the man in charge of our Facebook page, and I tend to pass a lot of photos at a time — more than most e-mail services will accept.  So I started using Microsoft’s SkyDrive service.  I upload photos or a zipped folder to SkyDrive, and the Facebook guy downloads them, easy-peasy.  Now here’s the key thing:  a few days ago, to improve the workings, I added the SkyDrive app to Windows; it creates a folder that you can drop stuff into, and it’ll be automagically uploaded to the SkyDrive service.

Well, it turns out Second Life and that app don’t like each other.  For some Strange Reason, the call for the upload folder and file from the client bangs into the SkyDrive app, and crashes the program.  A simple fix — just uninstall the app.  I’m back in business — literally, too, because Harper’s Art needs the upload ability to create my prints!

Riviera Medier gives us some suggestions for cleaning out old invisiprim shoes you don’t want to keep any more from your inventory. Many of you probably know of some of these ideas; for me, though, I’ve just stumbled on this, and I’ve been in world for four years now. Take a read and enjoy.

Riviera Chic

Spring is around the corner, and now is a good time to consider doing an invisiprim clean-up of your inventory. With the latest application upgrades, designers and consumers alike have moved from invisiprims to alpha masks and mesh. To those unfamiliar with Invisiprims, they were mostly used in the design of shoes and boots to keep the prim stable and avoid deformities. But with the introduction of alpha masks and mesh, we have seen a significant improvement whereby shoes and boots now have a larger range of movement, the ankle deformities have been corrected and they are AO compatible.

Invisiprims look like this –here above is a sample picture I took;   as you can see, they cause the extended shadows that usually wrap a shoe prim or boot prim. They conflict with the flooring builds and are quite…

View original post 363 more words

Tillie Ariantho on Photoshopping an SL photo

Tillie Ariantho is a very busy avatar.  From what I can see at her Flickr photo stream, she’s the go-to girl for event photography across Second Life, especially at fashion shows.  She also creates props for use in photo projects, several of which I have purchased from her and use in my work.

Now Tillie brings you some of her expertise in e-photography in a tutorial on Photoshopping an SL photo.  This article at her blog gives beginners the basics on taking a posed studio image and altering it to insert any background you have available.  Like many of us are familiar with, this is a “chroma key” process, in which a bright color unlike anything on the edges of the model is used as the background, and then is substituted for in the box.  I’ve used this a few times myself, with varying degrees of success, depending on the tools I have available.

Speaking of tools, Tillie’s tutorial is program-centric to Photoshop, which is not a surprising thing.  However, examining the article with a mind to your particular paint program can give you clues on how to adapt her instructions to your particular platform (Paint Shop Pro, GIMP, etc.)

TIP: Eye Makeup Order Matters

Here’s a tip that I had never heard since tattoo eye makeup began, but which some others in the Fashion Emergency group knew of, and that I worked out for myself about a week ago:  it matters what order you put on your makeup in Second Life, just as it can in real life.  If you don’t do the process with consideration of this factor, some things that can enhance the look you’re seeking will get covered up beneath a later tattoo.  To demonstrate, here’s a few examples; but first, let’s set the control for our experiment.

This is me, bare-face and scrubbed before the virtual worlds, so to speak.  This is my familiar PXL Candy skin that I wear almost all the time.  It has a built-in eyeliner, but no lashes, and the lips are a good color already.  In my experience, it won’t matter what level of layer you place the lipstick out of your makeup case, unless it is part of an eyeshadow suite that does both eyes and lips at the same time.  There are some products out there that combine the two for a unified, consistent look.  You’ll need to take this into account.

Example 1

Here, I have put on a set of Amacci lashes first, then an eyeshadow tattoo over that.  Notice how the lashes are almost lost beneath the shadow, especially on the lid itself.  This is because the coloring of the shadow is, of course, sitting on top of the lashes, blotting them out.  So, let’s flip the order.

See now how much darker the lashes are; they have actual definition, while you’re still able to get the color of the shadow beneath.  This is a more natural look, as makeup looks in real life.

Example 2

Here is a more subtle example, which I should leave as an exercise for you to see the difference between the two shots; but I’m not that mean (grin).  This has three layers, not just two:  lashes, shadow and a liquid eyeliner glaze for added definition and color.  But here, again, the lashes are underneath the other layers, with the glaze next and the shadow on top of that.  The effect here is not so bad with this particular combination of products, but look toward the lashes in the center, and the colors at the inner creases of the lids, and then compare with the next picture.

Notice how the makeup is much clearer in this photo, where the makeup is done in the right order (shadow, glaze, lashes).  Again, the lashes are now consistently visible; and the glaze line is now defined across the entire lid, adding additional “pop” to the look, that effect we all so desperately seek in RL on the advice of professional makeup artists.

Don’t be afraid to experiment, of course; you may want a particular look for a particular event or photo session.  But in most normal situations, keep your shadow on the bottom and the lashes on top.  You may also need to consider other items you’re adding beyond that, up to the viewer limit of five layers in a particular attachment zone; for instance, a set of White~Widow brow tattoos should be just below the lashes and on top of the shadow and liners, unless you don’t want particular details to show up in your photos.  And the last point to remember:  tattoos are system layers, like skin and base clothes.  Your mileage may vary with your computer; but be prepared to do a lot of rebaking as you add layers, so that you can see what it looks like.  (The shortcut for rebaking, for those who don’t know or remember, is Ctrl-Alt-R.)

Newbie Starter Resource from Strawberry Singh

The ever-gracious and ever-lovely Strawberry Singh has published a starter guide for Second Life newbies at her blog.  It’s a very useful item for someone trying to get their feet under them, and could even offer a few tips for us oldsters of 3 or more years’ duration in world (grin).

Thanks to New World Notes.

AN IOF PSA: Naming Conventions (via It’s Only Fashion)

This new trick is available in the latest beta of Firestorm as well as a dev of the Linden viewer. Gidge links in her article to the original by evie, and then pleads for something also very useful — designers (at least some of them) using a single abbreviation “convention” when naming their items….


AN IOF PSA: Naming Conventions With the ground breaking change of being able to copy to text what we are wearing, it’s more important than ever that what you the creator name your product be intuitive. It’s hard enough with a big inventory to find things. But that’s my problem not yours. However, if your shop name is SUSIE’S HOT SHOP but your individual items have a name let’s say HOTCHA, and then inside of the folder of that item is shirt, pant, whatever….it’ll look like TH … Read More

via It’s Only Fashion


%d bloggers like this: